Mylinking™ Network Packet Broker(NPB) ML-NPB-0810

Mylinking™ Network Packet Broker of ML-NPB-0810 has up to 80Gbps processing capacity. Supports a maximum of 8 slots 10G SFP+ (compatible with Gigabit), flexibly supporting 10-gigabit single/multi-mode optical modules and 10-GIGABit electrical modules. Supports LAN/WAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment, transport layer port range, Ethernet type field, VLANID, MPLS label, TCPFlag, fixed offset feature, and traffic.

Products Details

1- Overviews

  • A full visual control of Data Acquisition device(8*10GE SFP+ ports)
  • A full Data Scheduling Management device(duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 80Gbps)
  • Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing
  • Supported the VLAN, MPLS header in the original data packet is stripped and output.
  • Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel
  • Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
  • Supported real-time packet capture analysis, data source identification

2- System Block Diagram


3- Operating Principle


4- Intelligent Traffic Processing Abilities

6- Specifications

ML-NPB-0810 Mylinking™ Network Packet Broker  TAP/NPB Functional Parameters

Network Interface


8*10GE/GE SFP+ slot; support single/multiple mode fiber

Out-of-Band MGT interface

1*10/100/1000M electrical port

Deploy mode

10G optical splitting

Support 4*10G bidirectional link traffic acquisition

10G mirror acquisition

Support max to 8*10G mirror traffic inputting

Optical inputting

Input port supports single fiber splitting input;

Port multiplexing

Support input port as output port;

Flow output

Support 8 channels of 10GE flow output;

Traffic aggregating/replicating/distribution


QTYs of links supporting traffic duplicating/aggregating

1->N way traffic replication (N<8)

N->1 channel traffic aggregation (N<8)

Group G (M->N way) grouped traffic replication aggregation [ G*(M+N) < 8 ]

Port-based traffic identification diverting


port five tuple traffic identification diverting


Traffic identification divert strategy based on key tag of protocol header


Ethernet encapsulation unrelated support










SYSLOG protocol


User authentication

Based on users’ password authentication

Electric(1+1 Redundant Power System-RPS)

Rate power supply voltage


Rate power supply frequency


Rate input current

AC-3A / DC-10A

Rate power



Working temperature


Storage temperature


Working humidity

10%-95%, no condensation

User Configuration

Console configuration

RS232 interface, 9600,8,N,1

Password authentication


Height of Chassis


1U 445mm*44mm*402mm

7- Order Information

ML-NPB-0810 mylinking™ Network Packet Broker 8*10GE/GE SFP+ ports, max 80Gbps
ML-NPB-1610 mylinking™ Network Packet Broker 16*10GE/GE SFP+ ports, max 160Gbps
ML-NPB-2410 mylinking™ Network Packet Broker 24*10GE/GE SFP+ ports, max 240Gbps

FYR: Mylinking™ Network Packet Broker Packet Filtering Technology

Packet Filtering Technology is the most common firewall technology. For a dangerous network, a filter router provides a way to block certain hosts and networks from connecting to the internal network, or it can be used to restrict internal access to some dangerous and pornographic sites.

Packet Filtering Technology just as its name implies is the place for packet in the network have a choice, choose the basis, the filtering rules for the system (often known ACL as Access Control Lists, the Access Control List), only to meet the packet filtering rules is forwarded to the corresponding network interface, the rest of the packet is removed from the data stream.

Packet filtering can control site-to-site, site-to-network, and network-to-network access, but it cannot control the content of the data that is transmitted because the content is application-level data, not recognizable by the packet filtering system. Packet filtering allows you to provide special protection for the entire network in a single place.

The packet filter checking module penetrates between the network layer and the data link layer of the system.Because the data link layer is the DE facto network card (NIC) and the network layer is the first-layer protocol stack, the firewall is at the bottom of the software hierarchy.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours