Mylinking™ Network Tap ML-TAP-0601

Mylinking™ Network Tap of ML-TAP-0601 has up to 6Gbps processing capacity. Supports optical split or mirroring span access. Supports maximum 6 Gigabit electrical ports. Supports replication, aggregation (does not support filtering and streaming).

Products Details

product-description1

ML-TAP-0601

1- Traffic Replicator/Aggregator Overview

2- Mylinking™ Network Tap Features

2.3- Duplex wire-speed traffic replication capabilities
Mylinking™ Network Tap uses ASIC chip with hardware mode design which can wire-speed copy Ethernet signal. Flexibly and respectively make 1 link 1000Mbps port traffic copy to many roads 1000Mbps port, effectively making your intrusion detection, prevention systems, security audit system, protocol analyzers, RMON probes, and other security bypass deployment devices can completely monitor the data traffic, and ensure your network security better.

2.4- Flexible port group replication and aggregation function
Mylinking™ Network Tap with multiple 1000M Ethernet optical/electrical interface (depending on model), you can flexible define port group to achieve one or more of the 1000M Ethernet link signal replication. By defining a port group, and specify any number of traffic replication source port and destination port, it can support multiple traffic replication and aggregation source and destination port, and even support the traffic replication and aggregation of multiple source port to multiple destination port.

2.5- Supports 802.1Q traffic replication
Mylinking™ Network Tap Gigabit Ethernet traffic replicator/aggregator can be transparently supports the mirroring replication of TRUNK data source port, regardless of your mirroring data port is Trunk port or Access port, are able to achieve many-to-1 and many-to-many data replication. Flexibly to meet the needs of different topologies.

2.6- Multiple function and easy to use
- The factory configuration is 1 traffic replication source port, 5 traffic replication destination port, you don’t need other configuration, it can meet 1 to at most 5 links’ traffic replication demands.
-Simple and easy to use WEB management configuration.
-Status monitoring. Power LED provides a visual indicator, system status, interface rate, the LINK status, and Link Activity status.
-Fully compatible with intrusion detection systems, protocol analyzers, RMON probes, network audit system applications.

3- Mylinking™ Network Tap Typical Application Structures

3.1 Mylinking™ Network Tap for Traffic Replication Application(as following)

product-description3

Mylinking™ Network Tap one of the typical application is as a grouped traffic replication device. As shown above, the intrusion detection system and network behavior audit system are bypass deployed equipment, so which need monitor the data traffic from two core switches. Mylinking™ traffic replicator can use the grouped port replication technology which can flexibly and respectively copy the data from two different Gigabit Ethernet links to other four Gigabit Ethernet links. Perfectly meet simultaneous deployed in the network two or more multi-port monitoring bypass device needs, solved the mirroring problem of switches can’t support two destination port.

3.2 Mylinking™ Network Tap Traffic Aggregation Application(as following)

product-description4

Mylinking™ Network Tap is a grouped traffic replication and aggregation device. As shown above, the intrusion detection system and network behavior audit system are bypass deployed device, so both need to monitor data traffic from two core switches; since the deployment of intrusion detection system and network behavior audit system only support a single monitor port function, so they monitor the traffic which need to aggregate to a port. Mylinking™ traffic replicator can use the grouped port replication technology which can flexibly and respectively copy the data from two different Gigabit Ethernet links to other four Gigabit Ethernet links. Perfectly meet simultaneous deployed in the network two or more multi-port monitoring bypass device needs, solved the mirroring problem of switches can’t support two destination port.

4- System Performance

Mylinking™ Network Tap Gigabit Ethernet traffic replicator/aggregator uses a dedicated hardware ASIC chip to meet the Gigabit Ethernet traffic replication and convergence requirements, flexibility to achieve 1-to-many or many-to-many traffic replication and aggregation deployment.

Network Environment Bandwidth
Traffic Generation Engine Capacity >6Gbps
Single Port Replication capacity Maximum 1Gbps
Port Aggregation Capacity >5 sources port aggregation, total bandwidth is 1Gbps
Signal Replication Latency <10us
product-description5

5- Specifications

Mylinking™ Network Tap NPB/TAP Functional Parameters

Network Interface GE Electrical Ports

6 ports*10/100/1000M BASE-T

Functions

Total QTYs interface

6 ports

Maximum traffic rate ofReplication(Mbps)

1000

Maximum replicationports

1 -> 5

Multiple ports aggregation function

Supported

Traffic replication function

Supported

Electric

Rated supply voltage

AC110-240V

Rated power frequency

50HZ

Rated input current

AC-2A

Rated power function

40W

Environment

Operating Temperature

0-50℃

Storage Temperature

-20-70℃

Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 interface, 115200,8,N,1

Password authentication

support

Rack Height

Rack space (U)

1U

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours